What is the solution annealing process for stainless steel coils
source:
www.paybx.cn | Release time:2026年11月09日
Solid solution annealing, commonly referred to as solid solution in the industry, is a continuous heat treatment process for austenitic stainless steel coils (304, 316L, 321, 2205 duplex steel, etc.) after cold rolling; It is not the same as ordinary stress relief annealing. The core is to dissolve chromium carbide at grain boundaries into the austenite matrix at high temperatures, and then quickly cool to "lock" the uniform single-phase structure, restore corrosion resistance, and eliminate cold work hardening.
Stainless steel coils are generally produced in a continuous solid solution production line (continuous annealing furnace CAL/bright solid solution BAL), with continuous strip steel running, not batch furnaces.
1、 Process principle
Cold rolling and processing can cause work hardening, while carbon and chromium are prone to precipitate Cr ? ∝ C ? chromium carbide at grain boundaries, resulting in chromium depletion at grain boundaries and intergranular corrosion (sensitization).
Heating to solid solution temperature: chromium carbide and harmful metal phases dissolve, and Cr and C uniformly dissolve into the austenite lattice;
Insulation: Provide diffusion time and ensure uniform tissue composition;
Rapid rapid cooling: Quickly pass through the sensitization range of 450-850 ℃ to prevent the re precipitation of chromium carbide and obtain supersaturated single-phase austenite.
2、 Standard Process Three Steps (Stainless Steel Continuous Strip)
1. Heating section
304/316L:1040~1120℃;
321/347 (stabilized type): 1050-1150 ℃;
2205 duplex steel: 1020-1100 ℃ (controlling the ratio of ferrite/austenite phases).
Ammonia decomposition and hydrogen nitrogen mixture are commonly used in the furnace to create a bright solid solution annealing atmosphere, with no oxidation on the surface and no need for acid washing; Ordinary solid solution without protective atmosphere will produce oxide scale, followed by acid washing.
2. Insulation section (uniformly heated)
Thin strip steel (0.3-3mm) with short insulation time, matched according to thickness and line speed to ensure that the core temperature meets the standard; Too thick, insufficient insulation → carbides cannot dissolve completely, corrosion resistance is not qualified; High temperature → coarse grains, decreased material toughness, and easy peeling.
3. Cooling section (key, different from ordinary annealing)
Solid solution: fast cooling, thin strip can be strongly air-cooled, medium thick strip can be high-pressure spray water-cooled; It is necessary to quickly cross the allergy interval.
Ordinary annealing: Slow cooling inside the furnace, used for simple stress softening, cannot restore corrosion resistance, and slow cooling will instead precipitate chromium carbide.
3、 Core function of solution annealing (stainless steel coil in factory state)
1. Restoring the ability to resist intergranular corrosion is the core purpose of solid solution;
2. Eliminate cold rolling work hardening, reduce hardness, restore plasticity, and facilitate subsequent stamping and deep drawing;
3. Uniformly organize the composition and reduce residual stresses during rolling;
4. Bright solid solution can obtain a bright surface (2B/BA surface source process).
4、 Solid solution annealing vs ordinary annealing (stainless steel coil)
Solid solution annealing: high temperature of 1040 ℃+, rapid cooling; Goal: Dissolve carbides, restore corrosion resistance, and soften;
Low temperature stress relief annealing: 700-900 ℃, slow cooling; Goal: Stress alone cannot solve intergranular corrosion.
5、 Common quality control risk points (coil production)
Unstable linear speed, insufficient insulation: insufficient solid solution, and failure of intergranular corrosion test (copper sulfate method);
Insufficient cooling rate: re sensitization;
High temperature: grain coarsening, decreased elongation, surface orange peel;
Protecting impure atmosphere: surface oxidation, color difference, and dechlorination.