RM新时代手机版下载|首入球时间

<p id="yrgxp"><u id="yrgxp"></u></p>

  • <thead id="yrgxp"></thead>
      Welcome to Jiangsu Lichao New Material Technology Co., Ltd.
      The current position:Home page > Information dynamic  > Industry News return

      What is the impact of magnetic properties on the performance of stainless steel strip after cold pro

      source:www.paybx.cn  |  Release time:2026年11月16日
             In the solid solution state before leaving the factory, the matrix of austenitic stainless steel strip is single-phase austenitic structure. Austenite belongs to the face centered cubic lattice, which is paramagnetic and exhibits non-magnetic or extremely weak magnetism at the macroscopic level. During cold working deformation processes such as cold rolling, slitting, stamping, bending, and stretching of stainless steel strips, deformation induced martensitic transformation occurs under the action of plastic deformation induced by external forces, and some austenite structures transform into martensite with a body centered cubic lattice. Martensite has ferromagnetism, so the steel strip exhibits magnetism macroscopically; The greater the deformation and the higher the degree of work hardening, the higher the induced martensite content and the stronger the magnetic properties of the steel strip. This phenomenon belongs to the normal metallurgical characteristics during the cold working process of austenitic stainless steel. Magnetism itself is not a material defect, but the structural, stress, and mechanical changes caused by phase transformation will affect the performance from four dimensions: mechanical properties, corrosion resistance, subsequent processing technology, and special functional conditions. The specific details are as follows:
      1、 Influence on mechanical properties
      The deformation induced martensite itself is a high hardness and high strength phase, and the dislocation strengthening effect generated by cold processing will synchronously change the mechanical properties of the steel strip:
      1. Positive change: The tensile strength, yield strength, hardness, and elastic modulus of the material have significantly increased. This feature is actively utilized in engineering, for example, the 301 series stainless steel strip can achieve different states such as semi hard, fully hard, and extra hard by controlling the cold rolling deformation, and is widely used in components such as elastic parts, snap springs, gaskets, contact springs, etc. that require rebound and stiffness.
      2. Negative changes: The plasticity, cross-sectional elongation, and impact toughness of the material continue to decrease, and the greater the deformation, the more significant the plastic attenuation. If subsequent plastic forming processes such as secondary bending, deep drawing, and hole expansion are still required, the martensite enriched area is prone to become a source of crack initiation, significantly increasing the risk of cracking.
      3. Uniformity risk: During the rolling and forming process of steel strips, the distribution of deformation is uneven, and there are differences in the distribution of martensite in the transverse and longitudinal directions of the steel strip, resulting in inconsistent hardness and rebound of the same roll of steel strip. In precision stamping and continuous forming production, it can cause quality fluctuations such as decreased dimensional stability of parts and excessive rebound.
      2、 The impact on corrosion resistance performance
      It should be clarified that magnetism is not the cause of corrosion, but rather the increased risk of corrosion caused by the deformation of martensitic structure and residual stress from cold processing.
      1. Conventional dry atmospheric environment: Low content of deformed martensite has limited impact on corrosion resistance and generally does not significantly shorten the service life.
      2. Chlorine containing ion medium environment (coastal salt spray, water vapor, chemical media, disinfectant, etc.): There is a difference in electrochemical potential between the martensitic and austenitic phases, which form a micro electrochemical corrosion cell. The martensitic region acts as the anode and preferentially undergoes pitting corrosion; At the same time, cold processing retains a high residual stress inside the material, which couples with the corrosive medium and greatly increases the sensitivity to stress corrosion cracking (SCC) and crevice corrosion.
      3. Difference pattern of grades: 301 austenite has poor stability, with high martensite formation and significant corrosion resistance degradation under the same deformation; Followed by 304; 316L、 High nitrogen austenitic stainless steel has higher austenite stability, less martensite formation under the same cold deformation conditions, weak magnetic properties, and a smaller decrease in corrosion resistance; 200 series nickel austenitic stainless steel has low nickel content, poor austenite stability, and more prominent magnetic and corrosion risks after cold working.
      3、 The impact on subsequent processing techniques
      1. Welding processing: When the steel strip has magnetism, the welding arc is easily affected by magnetic field interference, resulting in magnetic bias blowing, causing unstable arc, offset of molten pool, poor fusion of weld seam, and easy to produce defects such as porosity, slag inclusion, incomplete penetration, and welding cracks; At the same time, the martensitic structure has a higher tendency to harden, and under the action of welding thermal cycles, the hardened area is more prone to cold cracks.
      2. Stamping and feeding automation processing: Magnetic adsorption effects occur between magnetic steel coils and steel strips, as well as between steel strips and molds. In high-speed automated feeding, laminated separation, and continuous stamping scenarios, double sheet feeding, jamming, and feeding positioning deviation are prone to occur, resulting in production downtime and scrap.
      3. Non destructive testing and surface treatment: If magnetic particle inspection is used for defect detection, the inherent magnetism of the material will form background magnetic noise, masking the magnetic traces of defects and interfering with defect determination; In surface treatment processes such as electrolytic polishing and passivation, the corrosion rate in the martensitic region is inconsistent, which can easily cause uneven passivation film and color difference on the surface.
      4、 Limitations on magnetic field sensitive working conditions
      In scenarios with strict control requirements for magnetic fields, even weak magnetism can constitute usage taboos:
      1. Medical MRI supporting components, precision sensing components, magnetic measuring instruments, magnetic sorting equipment, etc. The inherent magnetism of the steel strip can interfere with the magnetic field distribution, causing instrument signal drift, measurement errors, and equipment false triggering;
      2. In the magnetic iron removal production line of the food and pharmaceutical industry, tiny ferromagnetic martensite debris that falls off the steel strip after friction and wear will be identified as harmful iron impurities by the iron removal equipment, triggering a removal alarm and affecting the normal operation of the production line;
      3. Electromagnetic shielding and precision components related to radio frequency, the additional introduction of magnetism will change the magnetic permeability and affect electromagnetic performance.
      + WeChat ID:jinjiayi0512

      RM新时代手机版下载|首入球时间

      <p id="yrgxp"><u id="yrgxp"></u></p>

    1. <thead id="yrgxp"></thead>

        <p id="yrgxp"><u id="yrgxp"></u></p>

      1. <thead id="yrgxp"></thead>
          rm新时代理财官网 新世代RM官方网站 RM新时代专业团队|首入球时间 RM新时代APP官网网址 RM新时代专业团队